Manual

© PCE Instruments
33
English
5.4.2.2 Start/Stop datalogging menu
This submenu allows you to start and stop the datalogging process (fig. 11).
Fig. 46 Start/Stop datalogging submenu
Use the arrow keys ▲ and ▼ to select the desired action and press OK. In that moment, the ✓
icon will be displayed next to Stop or Start. Furthermore, if the selected action is Start, the device
will show a circle in the upper bar to indicate that it is measuring (fig. 12).
Fig. 47 Start mode active
The device will start measuring when it is turned on, no matter if datalogging is enabled or not.
This is because the device can be also used to display the current ambient parameters.