Edition EN03

Manual PCD2.W525&PCD3.W525│Document 26/853; Edition EN03│2013-09-18
Saia-Burgess Controls AG Conguration
2-3
2
Input status table:
Bit Description
3 Ouput transistor overheated
2 Not calibrated
1 Over range
0 Under range
Output status (Register n+7)
Thisregister(bits0to15)containsthestatusofthetwooutputchannelsCH0and
CH1.
Thestatusofeachoutputchannelisdisplayedin6bits.
Output status:
Bit Description
Bits0..5 CH0status(LOWBYTE)
Bits8..13 CH1status(HIGHBYTE)
Output status table:
Bit Description
CH0 CH1
5 13 Load resistance too high.
Onlyforoutputsincurrentmode.
Typicallyoccursiftheoutputcircuitisopen.
4 12 Load resistance too low.
Onlyforoutputsinvoltagemode.
Typicallyoccursintheeventofashortcircuit.
3 11 Ouput transistor overheated
2 10 Not calibrated
1 9 Over range
0 8 Under range