Manualshelf

User Guide

ManualsBrandsPCD ManualsMobile PhonesPCD Razzle (Verizon)
61626364656667686970
The default lock code is the last 4 digits of your mobile number.
EDIT CODES
To set a new lock code:
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press 9. Settings
& Tools, 6. Phone Settings, 7. Security.
2. Enter the four-digit lock code, then press the OK Key.
3. Press
1. Edit Codes.
4. Select one of the following settings, then press the OK Key.
t
Phone Only: Allows you to edit the lock code for Security. (The default lock code is
the last 4 digits of your mobile number.)
t
Calls & Services: Allows you to edit the lock code for Restrictions. (The default lock
code is the last 4 digits of your mobile number.)
5. If Phone Only is selected, enter the new four-digit code in the Enter
New Code field. Enter the new four-digit code again in the Re-enter
New Code field to confirm your input.
6. If Calls & Services is selected, enter the current lock code in the
Enter Current Code field. Enter the new four-digit code in the Enter
New Code field. Enter the new four-digit code again in the Re-enter
New Code field.
7. Press the OK Key [SET].
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press 9. Settings
& Tools
, 6. Phone Settings, 7. Security.
2. Enter the four-digit lock code, then press the OK Key. The default
lock code is the last 4 digits of your mobile number.
3. Press 2. Restrictions.
4. Enter the four-digit lock code again, then press the OK Key.
5. Select one of the following settings:
t
Location Setting: Unlock Setting/Lock Setting.
t
Calls: Incoming Calls/Outgoing Calls.
For Incoming Calls, set Allow All, Contacts Only or Block All.
For Outgoing Calls, set Allow All, Contacts Only or Block All.
t
Messages: Incoming Messages/Outgoing Messages.
For Incoming Messages, set Allow All or Block All.
For Outgoing Messages, set Allow All or Block All.
60
Chapter 4 − Menu Function
Settings