User Guide

This places the first call on hold. To switch back to the first caller, press

the SEND Key again.

CALLING A NUMBER FROM CONTACTS

1. From idle mode, press the OK Key to unlock the keypad, then press the

Right Soft Key

[Contacts].

2. Select the Contact entry and press the OK Key [VIEW], then select the

desired phone number.

3. Press the SEND Key

to place the call.

Selecting the Contact entry and then pressing the Send Key will dial the Default

Number of the Contact entry automatically. If multiple numbers are saved in the

Contact List, select the Contact entry, then select the phone number you want to dial.

Then press the Send Key .

ADJUSTING VOLUME

To adjust the master volume:

1. From idle mode, press the OK Key to unlock the keypad, then press the

Volume Keys / up or down.

2. Select one of the following options and press the OK Key [SET] to

save it.

All Sounds Off

Alarm Only

Vibrate Only

Low / Medium Low / Medium / Medium High / High

Press the Volume Keys / up or down to adjust Earpiece volume during

a call.

To play a ringtone, press the Left Soft Key [Play].

CALLER ID FUNCTION

Caller ID displays the number of the person calling when your phone

rings. If the caller’s identity is stored in Contacts, the name appears on the

screen. The caller ID is stored in the Recent Calls Menu.

VIBRATE ON/OFF MODE

Vibrate Mode mutes key tones and alerts for an incoming call or message. To

activate Vibrate Mode:

1. From idle mode, press the OK Key to unlock the keypad, swivel to the

QWERTY keypad, then press and hold the # Key . "VIBRATE MODE

ENABLED" appears on the display.

2. To disable Vibrate, press and hold the # Key

again. "VIBRATE

MODE DISABLED" appears on the display.

Basic Operation − Chapter 2

Basic Operation