User's Manual

3. Mac Filter
The MAC filtering option allows you to deny access to wireless clients based on their MAC address.
4. Station List
Shows the devices connected to the R402 wireless devices
Users connected to 2.4G Wi-Fi are listed in 2.4G list
Users connected to 5G Wi-Fi are listed in 5G list
●Security
1. Firewall
Firewall configuration: You can Disable or Enable the Firewall function. You can also set the matching packets rule to receive or reject.
You can add the rule as per below:
Delete: Check the rule, Click the ‘APPLY’ button to delete the IP filtering rule.
Protocol: Select the protocol for the IP filter rule.
Source IP: Enter the source IP address to be filtered.
2. NAT
The R402 supports NAT/IPSEC VPN Pass Through/PPTP VPN Pass Through/L2TP VPN Pass Through/Webserver WWAN Access.
When some hosts inside the private network have already allocated the local IP address, using only the private address in the private network. If they want to communicate with the host on the Internet (there is no need to encrypt), we can use the NAT
method.