User's Manual
UserManual
4
3) Touch Wi-Fi settings. Then a list of Wi-Fi network will show the founded network name and security settings. (open network
or WEP、WPA/WPA2 with password).If you enable the notification in Wi-Fi settings. The status box will show an icon when
open available wireless network founded.
4) Touch one of the Wi-Fi choices to connect the network. When you choose open network, phone will connect to
it automatically. If you choose WEP、WPA/WPA2 with password, you should type the password first, then
touch to connect it.
Notices：when the phone is connected to the wireless network,
The status box will show this Wi-Fi icon（ ）, and the approximate signal strengthen (the number of lit bars).If touch
the connected network，will display the name of Wi-Fi network, status, speed, signal, strength, security, information
and IP address. If you want to delete the wireless settings, please touch “not reserve”. If you want to connect to this
network, you should re-enter these settings.
Notices：
Unless you choose not to reserve the network, otherwise, there is no need to re-enter the corresponding password when next time
connecting to the previously encrypted wireless network. Wi-Fi will search automatically, that is, phone needn’t to perform additional steps
to connect Wi-Fi networks.
Connect to other Wi-Fi networks
1) In the interface of wireless and network, touch Wi-Fi settings. The founded Wi-Fi networks will show on the Wi-Fi network
list.
2) Touch other Wi-Fi networks, and then you can connect to this network.