User Manual

7
The device data is backed up to Google Drive. You must log in to Google account.
Sync may be enabled even if backup is turned off. Sync settings can be changed in
settings>Accounts>Google
Wi-Fi
Wi-Fi signal availability and coverage will be subject to quantity, infrastructure,
and other signals penetrate the object
Open Wi-Fi and connect to the wireless network
Press home > menu, then touch Settings > wireless and network.
Select the Wi-Fi check box to open Wi-Fi. Cell phone will automatically scan the
available wireless networks.
Touch Wi-Fi Settings. Then the Wi-Fi network list will display Wi-Fi networks to
find the network name and security Settings (open network or WEP, WPA/WPA2
encryption). If you enable notification Wi-Fi Settings of the network, mobile phone
will be available to find the open wireless network in the status bar shows the icon.
Touch one of the Wi-Fi networks, in order to connect. When you select the open
web, mobile phones will automatically connect to the network. If the selection is WEP,
WPA/WPA2 encryption, network, you must first enter the corresponding password,
and then touch the connection.
Note:
After the phone is connected to the wireless network, the status bar will display
the Wi-Fi icon, and displays the signal strength is roughly (number of strip lights up).
Unless you choose not to save the web, the next cell phone to connect to has
previously had connected the encryption of the wireless network, there is no need to
input password again. Wi-Fi network search for themselves, that is, cell phone does
not need to perform additional steps can be connected to a Wi-Fi network.
In addition, the mobile phone can also surf the Internet by GPRS. We currently the
default boot after the GPRS as the SIM card, user can choose manual, the specific
position in "Settings > > SIM card management" data connection, touch "data
connection", close the current SIM card data connection.
Bluetooth
Open the Bluetooth or set the phone to can be detected
Press home > menu, then touch Settings.
Touch and wireless networks, Bluetooth check box, and then select to open the
Bluetooth function. Bluetooth is turned ON, the status bar will appear here. Touch
scan for devices will start scanning within the scope of the Bluetooth device.
Touch Bluetooth Settings, all devices to find Bluetooth devices will be displayed in
the list below.
(Select check boxes can be detected, the mobile phone set to test, so that other
Bluetooth devices within the scope of can find cell phone.)
Paired and connected to the Bluetooth headset
Press home > menu, then touch Settings.