User's Manual

“Apply“ button , open the WPS. It will lasting 120 seconds. Like the following picture.
Using WPS to connecting the J600 (Computer for example):
You can press the WPS button on the wireless card if your wireless card also supports WPS authentication. Waitting
for a moment , It will be prompted to connect successfully.
Or
Select the SSID of the device and connect. then you can see connecting process.
The second method is, Select the SSID of the device and connect.
Press the WPS button on theJ600, activate the WPS. It will lasting 120 seconds.then you can see connecting process.
WPS PIN authentication:
The connection to the J600 is achieved by inputting the relevant PIN key into the enrollee PIN text box, which you
may find in the wireless network card. When you applied, It will lasting 120 seconds. The premise is that the wireless
network card or the clients must support WPS PIN authentication. Like the following pictures.