User Guide

2 1A. Setting Up Service
⽧ Setting Up Your Device (page 2)
⽧ Activating Your Device (page 3)
⽧ Sprint Account Password (page 3)
⽧ Getting Help (page 4)
Setting Up Your Device
1. Remove the back cover.
䡲 Simply slide the cover down (in the direction of
the arrow in Figure A). You may hear a click
sound.
2. Install the battery.
䡲 Remove the battery from its packaging.
䡲 As shown in Figure B, insert the battery into the
opening at the back of the device, making sure
the connectors align, and gently press down to
secure the battery.
3. Install the back cover onto your device.
䡲 Place the back cover at the back of the device,
and then slide up (in the direction of the arrow in
Figure C). You may hear a pop sound.
4. Press on the right of the device for about three
seconds to turn the device on.
䡲 If your device is activated, it will turn on, search for
Sprint service, and then be ready for Internet
connection.
䡲 If your device is not yet activated, see “Activating
Your Device” on page 3 for more information.
5. Set the wireless connection.
䡲 Double press on the right of the device, the
SSID (Wi-Fi network name) and the network
1A. Setting Up Service
Figure A Figure B
Figure C