User Guide

4E. Security Settings 37
Setting Up Service
3. Select Enabled from DMZ Status option button to
enable the DMZ feature.
4. Enter the host IP address in the DMZ IP Address
input field.
5. Select Apply to save the configuration, or select
Cancel to cancel the configuration.
UPnP
UPnP (Universal Plug and Play) is a set of networking
protocols that allow UPnP devices on a network to
detect each other and connect with each other
seamlessly automatically, and establish functional
network services for data sharing, communication, and
entertainment. Simply, UPnP allows automatic
discovery and configuration of devices attached to your
LAN.
To configure the UPnP:
1. From the Web management page, click the
Settings tab.
2. Select Security > UPnP Settings.
3. Select Enabled from UPnP Status option button to
enable the UPnP feature. Enable this feature only if
you trust the computers on the LAN.
4. Select Apply to save the configuration, or select
Cancel to cancel the configuration.