User Guide

4D LAN and DHCP Settings 33
LAN and DHCP Settings
for the LAN clients that support DHCP client capability.
If DHCP server service is disabled, you must have
another DHCP server on your LAN, or else each client
must be manually configured.
The device is pre-configured with a pool of IP
addresses for the DHCP clients (DHCP Pool). With the
DHCP server service enabled, you can change the start
IP address and the end IP address for the Pool or
reserve the default. You can also bind IP addresses to
MAC addresses one by one to prevent illegal theft of IP
address.
To configure the DHCP settings:
1. From the Web management page, click the
Settings tab.
2. Select DHCP in the left navigation tree.
3. Select Enabled from DHCP Server option button to
enable the DHCP Server feature of the device.
4. Enter the start IP address and the end IP address.
5. Select the lease of the IP address. The device
automatically leases the address in advance
according to the specified lease.
6. Select Apply to save the configuration, or select
Cancel to cancel the configuration.