User Guide

18 3A. Quick Start
Accessing the Internet via USB
The device supports a direct connection between a
USB cable and a compatible PC to access the Internet.
To access the Internet via USB:
1. Make sure the PC is on.
2. Press and hold the power button for 3 seconds to
turn on the device.
3. Connect the device to the PC. Plug the smaller end
of USB cable into the device’s micro USB port, and
the other end into an USB port of the PC as shown
in the following diagram.
4. You may see "Found new hardware" and "Driver
software installation" prompts. Install the driver
software according to the prompts.
Logging in to the Web Management
Page
The device's Web management page lets you set up,
configure, and manage your device's settings using a
simple Web interface on a connected computer.
To access the Web management page:
1. Connect the device to the PC via Wi-Fi or the USB
cable.
2. Launch Internet Explorer, enter http://192.168.1.1 in
the address bar, and then click
Enter. 
The main Web management page allows you to
Note: Carefully follow all system prompts to install the
software correctly. For Windows XP, if autorun is
disabled, go to
My Computer and double-click the
Express Mobile Hotspot icon to begin installation.
Note: The following example represents a Windows XP
computer running Internet Explorer 6.0.