User manual

2. Press the Right Soft Key [Settings] and select Sensitivity and
press the OK Key
.
3. Select Most Sensitive, Recommended or Least Sensitive and press
the OK Key
.
ADAPTATION
Voice Command is speaker independent, which means that no training or adaptation
is required. Some users with heavy accents or unusual voice characteristics may find
difficulty in achieving high accuracy with speaker independent Voice Command,
so the Adapt Voice feature allows users to dramatically improve the recognition
accuracy through adaptation. Users who get acceptable recognition accuracy will find
no additional benefit to performing the Adapt Voice adaptation.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. Press the Right Soft Key
[Settings] and select Adaptation and
press the OK Key .
3. Select Adapt Voice or Reset Voice and press the OK Key
.
• Adapt Voice: Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
• Reset Voice: Once you finish the adaptation process, you can reset the adaptation to
the factory default settings.
Reset Voice menu option only appears after you finish the Adapt Voice process.
4. Press the OK Key .
5. Wait for the beep and repeat the sentences using a normal tone
of voice.
6. Repeat steps 1-4. When you are finished with a full session, you
will reach a screen that reads Adaptation Complete.
PROMPTS
Allows you to select the voice command system characteristics.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. Press the Right Soft Key
[Settings] and select Prompts and
press the OK Key .
3. Select Mode or Audio Playback and press the OK Key
.
• Mode: Select the voice command system mode from the following:
- Prompts: For handset to read out voice command prompts.
- Readout: For handset to read out prompts, dialing digits and menus.
- Tones Only: For handset to prompt you with a tone only.
• Audio Playback: Allows audio playback to play through the speakerphone or
through the earpiece. Select Automatic, Speakerphone or Earpiece.
70 Chapter 4 − Menu Function
Voice ToolsVoice Tools
CALL ALERT
Provides audible readout of the phone number and/or name (if in your contact list) of
an incoming call.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key
, scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. Press the Right Soft Key
[Settings] and select Call Alert and
press the OK Key .
3. Select Ring Only, Caller ID + Ring or Name Repeat and press the
OK Key
.
ABOUT
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. Press the Right Soft Key
[Settings] and select About and press
the OK Key .
3. The VoiceSignal version appears.
4. To return to the previous screen and press the OK Key
.
Menu Function − Chapter 4 71
Voice ToolsVoice Tools
081002_CDM8950_ECHO_EN_REV00.indd 70-71081002_CDM8950_ECHO_EN_REV00.indd 70-71 2008.10.6 6:18:30 PM2008.10.6 6:18:30 PM