User manual

2. You will hear “Please say a command” and the Voice Commands
menu will be displayed.
3. S a y “ Check” followed immediately by one of the following items:
• Status / • Voicemail / • Messages / • Missed Calls / • Time /
• Signal Strength / • Battery / • Volume
CONTACT <NAME>
Use the Lookup command to retrieve and display information for any name stored
in your contact list.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. You will hear “Please say a command” and the Voice Commands
menu will be displayed.
3. S a y “ Contact <Name>”.
Examples: - Contact Tom Jones.
4. The View Contact page will be displayed for that contact name.
PLAY <PLAYLIST>
Use the Play command to playback one of the playlists. Say “PLAY” followed by a
playlist and your phone will playback the recognized playlist for you.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key
, scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. You will hear “Please say a command” and the Voice Commands
menu will be displayed.
3. S a y “ Play <Playlist>”.
Say “Play All Songs” (to playback all songs saved in your phone.)
MY VERIZON
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. You will hear “Please say a command” and the Voice Commands
menu will be displayed.
3. S a y “ My Verizon”.
4. Your phone will make a web connection.
68 Chapter 4 − Menu Function
Voice ToolsVoice Tools
HELP
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key
.
2. You will hear “Please say a command” and the Voice Commands
menu will be displayed.
3. Say “Help”.
4. The Help guide will be displayed on your phone.
VOICE COMMANDS SETTINGS
DIGIT DIAL READOUT
The Digit Dial Readout setting controls if digits are read out when you type in a phone
number with the keypad.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. Press the Right Soft Key
[Settings] and select Digit Dial
Readout and press the OK Key .
3. Select On or Off and press the OK Key
.
CONFIRMATION
When voice recognition is not confident it has recognized a name or number correctly,
it will show you a list of up to three choices. You can control when choice lists appear.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key
, scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
2. Press the Right Soft Key
[Settings] and select Confirmation and
press the OK Key .
3. Select Automatic, Always Confirm or Never Confirm and press the
OK Key
.
SENSITIVITY
The Sensitivity setting controls how the voice recognition software determines when a
spoken word is a match. If you frequently experience the messages “Please Repeat...” or
“No Match Found,” adjust the sensitivity toward Reject Less. If you frequently
experience false activations (when the phone recognizes a name you didn’t say), adjust
the sensitivity toward Most Sensitive.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key , scroll to Tools and press the OK Key , select Voice
Commands and press the OK Key .
Menu Function − Chapter 4 69
Voice ToolsVoice Tools
081002_CDM8950_ECHO_EN_REV00.indd 68-69081002_CDM8950_ECHO_EN_REV00.indd 68-69 2008.10.6 6:18:29 PM2008.10.6 6:18:29 PM