User manual

MAKING A CALL
1. Enter the phone number including the area code if needed and press
the SEND Key .
• To erase one digit at a time press the CLR Key .
• To erase the entire number, press and hold the CLR Key .
• When you place or receive a call from phone numbers stored in your contact list with
a contact name, the name will be displayed.
• If you activate the Auto Retry function, the phone will automatically re-dial the
number (Refer to page 60).
• You can also place calls using Voice-Activated Dialing. Please refer to page 66 for
more details.
ANSWERING CALLS
1. When your phone rings or vibrates, press the SEND Key to
answer the incoming call. (Depending on your phone’s settings, you
may also answer incoming calls by opening the phone or by pressing
any key.)
2. To ignore incoming calls, press the Right Soft Key
[Ignore].
In Auto w/ Hands-free a call is automatically answered after a preset number of ring
tones (Refer to page 60).
ENDING A CALL
1. To end a call, press the END Key .
MISSED CALL NOTIFICATION
When an incoming call is not answered, the Missed Call icon appears on the
display.
TO DISPLAY THE MISSED CALL ENTRY FROM THE
NOTIFICATION SCREEN:
1. Select the entry View Now and press the OK Key .
2. To dial the phone number, press the SEND Key
.
TO DISPLAY A MISSED CALL ENTRY FROM STANDBY MODE:
1. Press the OK Key [MENU], select Recent Calls then press the OK
Key .
2. Press 1. Missed.
3. Highlight the entry you wish to view and press the OK Key
[OPEN].
4. To dial the phone number, press the SEND Key
.
20 Chapter 2 − Basic Operation
Basic OperationBasic Operation
WAIT/PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail or calling cards).
Insert a pause after a phone number and enter another group of numbers.
The second set of numbers is dialed automatically after the pause. This feature
is useful for dialing into systems that require a code.
Wait (W)
The phone stops dialing until you press the Left Soft Key
[Release] to
advance to the next number.
2-Sec Pause
The phone waits 2 seconds before sending the next string of digits
automatically.
1. Enter the phone number.
2. Press the Right Soft Key
[Options].
3. Select 2-Sec Pause or Wait then press the OK Key
.
4. Enter additional number(s) (pin number or credit card number).
5. To dial press the SEND Key
or press the Left Soft Key [Save].
MAKING AN INTERNATIONAL CALL
1. Press and hold the * Key . The “+” required for international calls
will be displayed.
2. Enter the country code, area code and phone number.
3. Press the SEND Key
.
3WAY CALLING
With 3-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for each of
the two calls.
1. Enter the phone number to call and press the SEND Key .
2. Once you have established the connection, enter the second phone
number you wish to call and then press the SEND Key
again.
3. When you’re connected to the second party, press the SEND Key
again to begin your 3-Way call.
If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all three calls are
disconnected.
Basic Operation − Chapter 2 21
Basic OperationBasic Operation
081002_CDM8950_ECHO_EN_REV00.indd 20-21081002_CDM8950_ECHO_EN_REV00.indd 20-21 2008.10.6 6:17:43 PM2008.10.6 6:17:43 PM