User's Manual

Page 5 of 9
Receiver Connections
The Echo
®
Wireless Receiver is equipped with 4 connectors including 2 MIL, 1 industrial
Ethernet, and 1 N antenna connector. Labels for these connector are found on the bottom
of the receiver.
Both MIL connectors can be used interchangeably for power or data
transmission.
Location Connector Type Function Quantity
A MIL Power Cable or
Programming Cable
2
B Industrial Ethernet Network Cable 1
C N Antenna 1
Connection A – MIL Connector
The MIL connections are completely interchangeable. These connections are used for
two purposes. The first is the power for the Receiver unit. A supplied power adaptor has
a mating MIL connector and powers the unit with 110-220VAC line power. If power is
connected to the receiver the blue LED will light indicating the unit is on.
Tip
A
A
B C