Brochure

5
visit us online at www.imi-sensors.com
Toll-Free in USA 800-959-4464 716-684-0003
Echo Wireless Vibration System
LIFETIME WARRANTY
Products Guaranteed for Life & More!
Model 673A01
Wireless Reciever
 Placeholder Bullet Point One
 Placeholder Bullet Point Two
 Placeholder Bullet Point Three
The EchoPlus® Wireless Junction Box is an 8-channel
junction box that instantly converts installed industrial
sensors to wireless operation. This incredibly economical
device periodically powers each sensor, makes the same set
of overall measurements as Echo®, and transmits them
wirelessly. The default transmission interval is 8-hours but
is user programmable. Additionally, it operates as a
standard junction box allowing full data collection with a portable data collector at the box. It can be
powered using either standard 24 VDC or any battery between 6 and 14 VDC. The unit can be used by
itself or in conjunction with an existing junction box by simply jumping wires between them.
Model 627A01
Wireless Vibration Sensor
 Placeholder Bullet Point One
 Placeholder Bullet Point Two
 Placeholder Bullet Point Three
The Echo® Wireless Vibration Sensor and the
EchoPlus® Wireless Junction Box make the set of
overall vibration measurements, listed below, that
are sure to provide early warning of most common
machine faults. In addition to these
measurements, Echo® provides accurate battery
status. Using a user programmable vibration
threshold, Echo® can detect if the machine is not
running, and if not, skip a measurement to
conserve battery power. It also has an optional
Raw Vibration Output (requires optional Model
070A86 cable) for use with a portable data
collector.