User's Manual

OTHER FUNCTIONS
Restarting the device
If the screen does not response to key press or tap, press the reset button
(located inthe hole) using any thin object (paper clip, pin, etc.) to restart your
Tablet PC or keeppower button for long time
Factory reset
To delete all data and restore your Tablet PC to factory defaults, touch
Settings
> Recovery and reset; touch menu item Reset > Reset to factory defaults.
Contents
Tablet, USB Cable, OTG Cable, Power adapter AC / DC, Quick Guide
Charging the battery
Device is provided with built in rechargeable battery There is no need of
supplementalbatteries. Important: The battery must be charged for at least 5
hours before using it.
Connecting to computer
Connect the tablet to a computer the computer.
1. Connect your tablet to the computer.
With the included USB cable: Plug the small end of the cable into the
USB2.0 high speed connector of the tablet. Plug the large end of the cable
into available USB2.0 high speed port on the computer.
2. When your tablet is connected. Slide up the USB icon right down on the
screen and then touch icon USB connected.
3. Mount the storage
Touch button turn on USB storage to mount the tablet’s bulit-in storage.
When it is mounted, you can copy files to or from your tablet.
GPS Navigation
Map of the third parties is required for MID internal GPS satellite signal
receiver positioning. After installation the device can accurately implement
traffic real-time navigation, meet the needs of outdoor navigation.