MSDS

ManualsBrandsPC Products ManualsPaint32 oz. PC-Masonry Epoxy

Material Safety Data Sheet

PC - Masonry, Part A MSDS No. 130315-47

Date of Preparation: 3/15/2013 Revision:2

Section 1 - Chemical Product and Company Identification

Product/Chemical Name: PC Masonry, part A

Chemical Formula: Mixture

CAS Number: Mixture

General Use: Adhesive

Manufacturer: Protective Coating Company, 221 S. Third St., Allentown, PA 18102-4922, Emergency Phone 1-800-255-3924,

International + 01 or +001-813-248-0585 (Please call collect if necessary) (24 Hr) CHEM-TEL

Contact Phone (610)432-3543, FAX (610)432-5043 (9AM-5PM EST)

Section 2 - Composition / Information on Ingredients

Ingredient Name CAS Number

Bisphenol A Epoxy Resin

Bis(2-ethylhexyl)-1,4-benzenedicarboxylate

25068-38-6

6422-86-2

Magnesium Silicate

Aluminum Silicate

Glycidyl Ethers of Bisphenol F Resin

14807-96-6

1332-58-7

28064-14-4

Section 3 - Hazards Identification

 Emergency Overview 

HMI

PPE

†B

†

Sec. 8

Potential Health Effects

Acute Effects

Inhalation: none

Eye: moderate eye irritation or sensitization.

Skin: moderate skin irritation or sensitization.

Ingestion: possible irritation.

Carcinogenicity: IARC, NTP, and OSHA do not list PC - Masonry, Part A as a carcinogen.

Medical Conditions Aggravated by Long-Term Exposure: skin and eye conditions.

Section 4 - First Aid Measures

Inhalation: Remove to fresh air.

Eye Contact: Flush with water, consult a physician.

Skin Contact: Wash with water, consult a physician.

Ingestion: Seek medical advice.

After first aid, get appropriate in-plant, paramedic, or community medical support.

Section 5 - Fire-Fighting Measures

—

NFPA

Flash Poin

t: 480 F

Flash Point Method: Closed Cup

Flammability Classification: IIIB

Extinguishing Media: Water spray, CO

2, dry chemicals.

Unusual Fire or Explosion Hazards: None known.

Hazardous Combustion Products: Carbon monoxide, carbon dioxide, aldehydes

Fire-Fighting Instructions: Do not release runoff from fire control methods to sewers or waterways.

Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear a self-contained breathing

apparatus (SCBA) with a full facepiece operated in pressure-demand or positive-pressure mode.

Section 6 - Accidental Release Measures

Spill /Leak Procedures: Dispose of in normal manner.

Disposal: Incinerate in furnace of bury in landfill according to applicable regulations; not a hazardous waste.

Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).

Summary of content (6 pages)

PAGE 1
Material Safety Data Sheet PC - Masonry, Part A MSDS No. 130315-47 Date of Preparation: 3/15/2013 Revision:2 Section 1 - Chemical Product and Company Identification Product/Chemical Name: PC Masonry, part A Chemical Formula: Mixture CAS Number: Mixture General Use: Adhesive Manufacturer: Protective Coating Company, 221 S. Third St.
PAGE 2
PC - Masonry, Part A MSDS No. 130315-47 Date of Preparation: 3/15/2013 Revision:2 Section 7 - Handling and Storage Ventilation: Provide general or local exhaust ventilation systems if product is sanded or ground. Respiratory Protection: Follow OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/NIOSHapproved respirator. Protective Clothing/Equipment: Wear chemically protective gloves to prevent skin contact.
PAGE 3
PC - Masonry, Part A MSDS No. 130315-47 Date of Preparation: 3/15/2013 Revision:2 Section 14 - Transport Information DOT Transportation Data (49 CFR 172.101): Shipping Name: Not regulated Shipping Symbols: Not applicable. Hazard Class: Not Hazardous ID No.: Not applicable. Packing Group: Not determined Label: Not required Special Provisions (172.102): None Section 15 - Regulatory Information EPA Regulations: RCRA Hazardous Waste Number: Not listed (40 CFR 261.
PAGE 4
Material Safety Data Sheet PC - Masonry, Part B MSDS No. 130315-48 Date of Preparation: 3/15/2013 Revision:2 Section 1 - Chemical Product and Company Identification Product/Chemical Name: PC-Masonry, part B Chemical Formula: Mixture CAS Number: Mixture General Use: Adhesive Manufacturer: Protective Coating Company, 221 S. Third St.
PAGE 5
PC - Masonry, Part B MSDS No. 130315-48 Date of Preparation: 3/15/2013 Revision:2 Section 7 - Handling and Storage Ventilation: Provide general or local exhaust ventilation systems if product is sanded or ground. Respiratory Protection: Follow OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/NIOSHapproved respirator. Protective Clothing/Equipment: Wear chemically protective gloves to prevent skin contact.
PAGE 6
PC - Masonry, Part B MSDS No. 130315-48 Date of Preparation: 3/15/2013 Revision:2 Section 14 - Transport Information DOT Transportation Data (49 CFR 172.101): Shipping Name: Not regulated Shipping Symbols: Not applicable. Hazard Class: Not Hazardous ID No.: Not applicable. Packing Group: Not determined Label: Not required Special Provisions (172.102): None Section 15 - Regulatory Information EPA Regulations: RCRA Hazardous Waste Number: Not listed (40 CFR 261.