User`s guide

21
Chapter 2: Motherboard Installation
Follow the steps below to install an AGP/CNR/PCI expansion
card.
1. Locate the AGP, CNR or PCI slots on the motherboard.
2. Remove the blanking plate of the slot from the system
chassis.
3. Install the edge connector of the expansion card into the
slot. Ensure the edge connector is correctly seated in the
slot.
4. Secure the metal bracket of the card to the system
chassis with a screw.
8x/4x AGP Slot
You can install a graphics adapter that supports the 8x/4x AGP
specification and has a 8x AGP edge connector in the AGP slot.
CNR Slot
You can install the CNR (Communications and Networking Riser)
cards in this slot, including LAN, Modem, and Audio functions.
PCI Slots
You can install the 32-bit PCI interface expansion cards in the
slots.