Datasheet

45
Chapter 3: BIOS Setup Utility
B.O.M.P Technology (Enabled)
This item allows users to enable or disable B.O.M.P technology. This function can run
safe setting to setup menu when system boot fail 3 times.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
RAS# to CAS# Delay(tRCD) (9)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
RAS# Active Time(tRAS) (24)
This item specifies the RAS# active time.
Press <Esc> to return to the Performance Tunning page.
Press <Esc> to return to the Tweak Setup page.
Row Precharge Time(tRP) (9)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
CAS#Latency(tcl) (9)
This item determines the operation of DDR SDRAM memory CAS(column address
strobe). It is recommanded that you leave this item at the default value. The 2T setting
requires faster memory that specifically supports this mode.
ROW Refresh Cycle Time (tRFC) (107)
This item specifies the Row refresh cycle time.
Write Recovery Time (tWR) (10)
This item specifies the write to read delay.
Write to Read Delay (tWTR) (5)
This item specifies the write to read delay.
Active to Active Delay(tRRD) (4)
This item controls the ACTIVE bank x to ACTIVE bank y delay in memory clock
cycles.
Read CAS# Precharge (tRTP) (5)
This item controls the Read to PRECHARGE delay for memory devices, in
memory clock cycles.
Four Active Window Delay(tFAW) (20)
This item controls the four bank activate time in memory clock cycles.
GT OverClocking (Disabled)
This item allows you to control the internal GFX Turbo mode.