Datasheet

44
Motherboard User’s Guide
Power Limit 2 Value (118)
Use this item to control Power Limit 2. PL2 provides an upper limit of the TDP
excursions. This is for Turbo mode.
Long Duration maintained (1)
Use this item to control the time window over PL1 value should be maintained.
This is for Turbo mode.
Enhanced Intel SpeedStep Technology (Enabled)
This item allows users to enable or disable the EIST(Enhanced Intel SpeedStep
Technology).
Turbo Mode (Enabled)
This item allows you to control the Intel Turbo Boost Technology.
Press <Esc> to return to the Performance Tunning page.
fChipset Configuration
Scroll to this item to view the following screen:
1/2/3/4-Core Ratio (34/33/32/31)
This item shows the Core Ratio limit value.
Memory Multiplier (13.33)
This item shows the value of Memory Multiplier.
Main Advanced Chipset Tweak Boot Security Exit
Disabled/Enabled GT
OverClocking
Memory Multiplier Configuration
Memory Multiplier 13.33
Memory Timing Configuration
CAS# Latency (tCL) 9
Row Precharge Time (tRP) 9
RAS# to CAS# Delay (tRCD) 9
RAS# Active Time (tRAS) 24
Write Recovery Time (tWR) 10
Row Refresh Cycle Time (tRFC) 107
Write to Read Delay (tWTR) 5
Active to Active Delay (tRRD) 4
Read CAS# Precharge (tRTP) 5
Four Active Window Delay (tFAW) 20
Intel Graphics Configuration
GT OverClocking Disabled
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit