User`s guide

33
Chapter 3: BIOS Setup Utility
User Password
This item indicates whether a user password has been set. If the password has
been installed , Installed displays. If not, Not Installed dispalys.
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in
the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box
appears, press [OK] to save and exit, or press [Cancel] to return to the main
menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made
in the Setup Utility and exit the Setup Utility. When the Exit Without Saving
dialog box appears, press [OK] to discard changes and exit, or press [Cancel] to
return to the main menu.
Change Supervisor Password
You can select this option and press<Enter> to access the sub menu. You can use
the sub menu to change the supervisor password.
CMOS Setup Utility – Copyright (C) 1985-2007, American Megatrends, Inc.
User Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
User Password : Not Installed
User Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
Note: If you have made settings that you do not want to save, use the “Exit
Without Saving” item and presst [OK] to discard any changes you have
made.
Press <Esc> to return to the main menu setting page.
Press <Esc> to return to the main menu setting page.