User`s guide
32
Motherboard User’s Guide
PCIE Spread Spectrum
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic interface) generated by the PCIE.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized
defaults or not. You select [OK], and then <Enter>, the Setup Utility loads all
default values; or select [Cancel], and then <Enter>, the Setup Utility does not
load default values.
Note: It is highly recommend that users enter this option to load optimal default
values for accessing the best performance.
Supervisor Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
CMOS Setup Utility – Copyright (C) 1985-2007, American Megatrends, Inc.
Supervisor Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Supervisor Password : Not Installed
Change Supervisor Password
Installed or Change the
password.
Press Enter
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed , Installed displays. If not, Not Installed dispalys.
Memory Voltage
This item allows users to adjust the DDR memory voltage.
CPU BSEL Select
This item is used to select the CPU BSEL.
Press <Esc> to return to the main menu setting page.
NB Voltage
This item allows users to adjust the Northbridge voltage.