User`s guide

Chapter 3: BIOS Setup Utility

Press <Esc> to return to the main menu setting page.

Resume By PCI/PCI-E/Lan PME

These items specify whether the system will be awakened from power saving

modes when activity or input signal of the specified hardware peripheral or compo-

nent is detected.

Resume By USB(S3)

This item allows you to enable/disable the USB device wakeup function from S3/S4

mode.

PWRON After PWR-Fail

This item enables your computer to automatically restart or return to its operating

status.

Resume By PS2 KB(S3)

This item enable or disable you to allow keyboard activity to awaken the system

from power saving mode.

Resume By PS2 MS(S3)

This item enable or disable you to allow mouse activity to awaken the system from

power saving mode.

Resume By Ring

An input signal on the serial Ring Indicator (RI) line (in other words, an incoming

call on the modem) awakens the system from a soft off state.

Resume on RTC Alarm

The system can be turned off with a software command. If you enable this item, the

system can automatically resume at a fixed time based on the system’s RTC

(realtime clock). Use the items below this one to set the date and time of the wake-

up alarm. You must use an ATX power supply in order to use this feature.

This page sets up some parameters for devices installed on the PCI bus and

those utilizing the system plug and play capability.

PCI / PnP Setup Page

PCI / PnP Setup

Init Display First PCI

Help Item

: Move Enter: Select +/-/: Value F10: Save Esc: Exit

F1: General Help F9: Optimized Defaults

PCI-E

PCI

Options