User`s guide

24
Motherboard User’s Guide
Advanced Setup Page
This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
* TM Status
This item display CPU Thermal Monitor status.
Limit CPUID MaxVal
This item can support Prescott CPUs for old OS. Users please note that under
NT 4.0, it must be set “Enabled”, while under WinXP, it must be set “Disabled”
CMOS Setup Utility – Copyright (C) 1985-2007, American Megatrends, Inc.
Advanced Setup
Help Item
Thermal Managment
TM Status
Limit CPUID MaxVal
Enhanced Halt (C1E)
Intel XD Bit
Intel EIST
Quick Power on Self Test
Bootup NumLock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Removable Drives
Boot Other Device
BIOS Protect
TM1/TM2
Enabled
Disabled
Enabled
Enabled
On
Enabled
Hard Drive
CD/DVD
1st FLOPPY DRIVE
Press Enter
Yes
Disabled
Disabled
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Enabled
For the processor its
CPUID belows 0F14h.
TM2 only can be enable
under below settings.
1.Freq.>=3.6GHz FSB800
2.Freq.>=2.8GHz FSB533
Thermal Management
This item displays CPU’s temperature and enables you to set a safe temperature
to Prescott CPU.
Enhanced Halt (C1E)
This item enables or disables enhanced halt (C1E).
Intel XD Bit
This item allows users to enable or disable the Intel XD bit.
Intel EIST
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
technology).
Quick Power On Self Test
Enable this item to shorten the power on self testing (POST) and have your
system start up faster. You might like to enable this item after you confident that
your system hardware is operating smoothly.