User`s guide

7
Chapter 2: Motherboard Installation
I/O Ports
The illustration below shows a side view of the built-in I/O ports on the
motherboard.
PS/2 M ouse Use the upper PS/2 port to connect a PS/2 pointing
device.
PS/2 Keyboar d Use the low er PS/2 port to connect a PS/2
keyboard.
COM Use the COM port to connect serial devices such
as mice or fax/modems. COM is identified by the
system as COM.
VGA Port Use the VGA port to connect VGA devices.
LAN Port Connect an RJ-45 jack to the LAN port to connect
your computer to the Netw ork.
USB Po r t s Use the USB ports to connect USB devices.
Audio Ports Use these three audio jacks to connect audio
devices. The first jack is for stereo Line-In signal,
the second jack for stereo Line-Out signal, and the
third jack for Microphone.