User`s guide

Chapter 2: Motherboard Installation

Pin Signal Pin Signal

1 HD_LED_P(+) 2 FP PWR/SLP(+)

3 HD_LED_N(-) 4 FP PWR/SLP(-)

5 RESET_ SW_ N( - ) 6 POWER_SW_P( +)

7 RESET_ SW_ P( +) 8 POWER_SW_N( - )

9 RSV D_DNU 10 KEY

Here is a list of the F_PANEL pin assignments.

Install the Motherboard

Install the motherboard in a system chassis (case). The board is a Micro ATX size

motherboard. You can install this motherboard in an ATX case. Make sure your

case has an I/O cover plate matching the ports on this motherboard.

Install the motherboard in a case. Follow the case manufacturer’s instructions to

use the hardware and internal mounting points on the chassis.

Connect the power connector from the power supply to the ATX_POWER

connector on the motherboard. The ATX12V is a +12V connector for CPU Vcore

power.

If there is a cooling fan installed in the system chassis, connect the cable from the

cooling fan to the CPU_FAN fan power connector on the motherboard.

Connect the case switches and indicator LEDs to the F_PANEL header.