User`s guide

27
Chapter 3: BIOS Setup Utility
Init Dispaly First
This item allows you to choose the primary display card.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
This page sets up some parameters for devices installed on the PCI bus and
those utilizing the system plug and play capability.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Init Display First PCI
Allocate IRQ to PCI VGA Yes
Help Item
PCI
PCI Express Card
IntVGA
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Options
PCI Health Status Page
This page helps you monitor the parameters for critical voltages, temperatures
and fan speeds.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
Hardware Health Event Monitoring
Smart Fan Function
Shutdown Temperature Disabled
Warning Temperature Dsiabled
CPU Temperature : 57°C/ 134°F
SYSTEM Temperature : 38°C/ 100°F
CPU Fan Speed : 3835 RPM
System Fan Speed : 0 RPM
CPU Vcore : 1.328 V
VDIMM : 1.792 V
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Press Enter
PCI / PnP Setup Page