User`s guide

24
Motherboard User’s Guide
This page sets up some parameters for peripheral devices connected to the
system.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item
DISABLED: disables
the integrated IDE
Controller.
PRIMARY: enables only
the Primary IDE
Controller.
IDE
Enabled
Enabled
HDA DEVICE
Enabled
Disabled
3F8/IRQ4
Disabled
OnBoard IDE Controller
SATA Mode Selection
USB Controller
Legacy USB Support
OnBoard Audio DEVICE
OnBoard SiS191 Lan DEVICE
Onboard LAN Boot ROM
Serial Port1 Address
OnBoard IR
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Primary
Integrated Peripherals Page
Use this item to enable or disable the onboard infrared port, and to assign a port
address.
OnBoard IR
Use this item to enable or disable the onboard COM1/2 serial port, and
to assign a port address.
Serial Port1 Address
SATA Mode Selection
Use this item to select the mode of the Serial ATA.
OnBoard IDE Controller
USB Controller
Legacy USB Support
OnBoard Audio DEVICE
OnBoard SiS191 Lan DEVICE
OnBoard LAN Boot ROM
Enables or disables the onboard USB controller. We recommend users keep the
default value. Disabling it might cause the USB devices not to work properly.
This item allows you to enable or disable Legacy USB support.
This item enables or disables the onboard LAN Boot ROM function.
Use this item to enable or disable the onboard IDE controllers.
Enables or disables the onboard Audio.
This item allows you to control the onboard SiS191 Lan device.