User`s guide

22
Motherboard User’s Guide
Boot Up NumLock Status
This item set the Num-Lock key to be on or off after bootup.
APIC Mode
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APCI provides symmetric multi-procesing (SMP)
for systems, allowing support for up to 60 processors.
1st Boot Device/2nd Boot Device/3rd Boot Device
Use these items to determine the device order the computer uses to look for an
operating system to load at start-up time.
Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
f
Specifies the boot
sequence from the
available devices.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Removable Drives
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Removable Drives
1st Drive
Help Item
1st FLOPPY DRIVE
Press <Esc> to return to Advanced Setup screen.
CD/DVD Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
f
Specifies the boot
sequence from the
available devices.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
CD/DVD Drives
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
CD-DVD Drives
1st Drive
Help Item
PIONEER DVD-ROM DVD
Press <Esc> to return to Advanced Setup screen.
Quick Power on Self Test
Enable this item to shorten the power on testing (POST) and have your system
start up faster. You might like to enable this item after you are confident that
your system hardware is operating smoothly.