User`s guide

7
Chapter 2: Motherboard Installation
I/O Ports (Optional)
The illustration below shows a side view of the built-in I/O ports on the
motherboard.
PS/2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing
device.
PS/2 Keyboard
Use the low er PS/2 port to connect a PS/2
keyboard.
Parallel Port (LPT1)
(optional)
Use the Parallel port to connect printers or other
parallel communications devices.
COM1
Use the COM port to connect serial devices such
as mice or fax/modems. COM1 is identified by the
system as COM1.
VGA
Use the VGA port to connect VGA devices.
LAN Port (optional)
Connect an RJ-45 jack to the LAN port to connect
your computer to the Netw ork.
USB Po r ts
Use the USB ports to connect USB devices.
Audio Ports
Use these three audio jacks to connect audio
devices. The first jack is for stereo Line-In signal,
the second jack for stereo Line-Out signal, and the
third jack for Microphone.
Use these audio jacks to connect audio devices.
The Aport is for stereo Line-In signal, w hlie the C
port is for microphone in signal. The motherboard
supports 8-channel audio devices that correspond
to A, B, D and E port respectively. In addition, all of
the three ports, A, B and D provide users w ith
both right & left channels individually.