User`s guide

Motherboard User’s Guide

System Time & System Date

These items set up system date and time.

Primary IDE Master/Primary IDE Slave/Secondary IDE Master/Secondary

IDE Slave

Your computer has two IDE channels and each channel can be installed with one

or two devices (Master and Slave). In addition, this motherboard supports two

SATA channels and each channel allows one SATA device to be installed. Use

these items to configure each device on the IDE channel.

S-ATA 1/2

These items configure devices connected to the Serial ATA channels. To configure

a S-ATA hard disk drive, choose Auto.

Floppy A

This item set up size and capacity of the floppy diskette drive(s) installed in the

system.

You can use cursor arrow keys to highlight anyone of options on the main menu

page. Press Enter to select the highlighted option. Press the Escape key to leave

the setup utility. Press +/-/ to modify the selected field’s values.

Some options on the main menu page lead to tables of items with installed values

that you can use cursor arrow keys to highlight one item, and press

+ and

- keys

to cycle through alternative values of that item. The other options on the main

menu page lead to dialog boxes requiring your answer OK or Cancel by selecting

[OK] or [Cancel].

If you have already changed the setup utility, press F10 to save those changes

and exit the utility. Press F1 to display a screen describing all key functions.

Press F9 to install the setup utility with a set of default values.

Standard CMOS Setup Page

This page displays a table of items defining basic information about your

system.

Standard CMOS Setup

System Time 00:01:25

System Date Fri 10/24/2003

Primary IDE Master Hard Disk

Primary IDE Slave Not Detected

Secondary IDE Master Not Detected

Secondary IDE Slave CD/DVD ROM

S-ATA 1 Not Detected

Floppy A 1.44 MB 3 1/2”

Help Item

User [Enter], [TAB] or [SHIFT-TAB] to

select a field.

Use [+] or [-] to configure system

time.