Specifications

Full-duplex Codec with independent and variable sampling
rate
Earphone Buffer Built-In, SNR up to 90db
4Ch DAC, support 4-channel speak-out
Advanced power management support
Expansion Options
The mainboard comes with the following expansion options:
Four 32-bit PCI slots
One 8x AGP slot
One Communications Network Riser (CNR) slot
Onboard IDE
Two IDE Connectors
Supports PIO (Programmable Input/Output) and DMA
(Direct Memory Access) modes
Supports IDE Ultra DMA bus mastering with transfer rates
of 33/66/100/133 MB/sec
Onboard I/O Ports
The mainboard has a full set of I/O ports and connectors:
Two PS/2 ports for mouse and keyboard
One serial port
One parallel port
Six USB2.0 ports (four back-panel ports, onboard USB
connector USB3 providing two extra ports
Audio jacks for microphone, line-in and line-out
Fast Ethernet LAN (optional)
Supports 10/100Mbps operation and half/full duplex
operation
IEEE 802.3/802.3u compliant
Supports IEEE 802.3u clause 28 auto negotiation
Supports operation under Link Down Power Saving mode
Supports Base Line Winder (BLW) compensation
Adaptive Equalization
3