Specifications

Chapter 1
Introduction
This mainboard has a Socket-478 supporting Intel
Pentium 4/Hyper Threading Technology processors with
Front-Side Bus (FSB) speeds up to 800 MHz. Hyper Threading
Technology, designed to take advantage of the multitasking
features in Windows XP, gives you the power to do more things at
once.
This mainboard integrates the 868Pro HT1683/HT1563 chipsets
that support the built-in USB 2.0 providing higher bandwidth,
implementing Universal Serial Bus Specification Revision 2.0
and is compliant with UHCI 1.1 and EHCI 0.95.
This mainboard also supports AC 97 Audio Codec and provides
Ultra DMA 33/66/100/133 function. There are one 8x AGP, one
CNR (Communications and Networking Riser) and four 32-bit
PCI slots on the mainboard. There is a full set of I/O ports
including two PS/2 ports for mouse and keyboard, one serial port,
one parallel port and maximum six USB2.0 ports – four back-panel
ports and onboard USB connectors USB3 providing four extra
ports by connecting the Extended USB Module to the mainboard.
This mainboard is an ATX mainboard and has power connectors
for an ATX power supply.
Note: You must initiate the HT CPU function through
BIOS setup. It is strongly recommended you
refer to Page 34 for relative details.