Specifications

14
Pin Signal Pin Signal
1 Vcc5V 2 USB-
3 USB+ 4 GND
5 KEY
The JP1 is shared with the lower USB port located
beside the VGA port of the I/O back panel. Please see
“I/O Ports” for more information.
Please check the pin assignment of the cable and the
USB header on the motherboard. Make sure the pin
assignment will match before plugging in. Any
incorrect usage may cause unexpected damage to
the system. The vendor won’t be responsible for any
incidental or consequential damage arising from the
usage or misusage of the purchased product.
IR1: Infrared Port
The infrared port allows the wireless exchange of information
between your computer and similarly equipped devices such as
printers, laptops, Personal Digital Assistants (PDAs), and other
computers.
Pin Signal Pin Signal
1 NC 2 KEY
3 +5V 4 GND
5 IRTX 6 IRRX
1. Locate the infrared port IR1 connector on the motherboard.
2. If you are adding an infrared port, connect the ribbon cable
from the port to the IR1 connector and then secure the port to
an appropriate place in your system chassis.