User`s manual

Chapter 1
Introduction
This mainboard has a Socket-A support for the AMD K7
processors. The Socket-A processor’s front-side bus speed is
266MHz.
This mainboard integrates the SiS740 Northbridge and SiS962L
Southbridge chipsets that support DDR 266MHz, Ultra DMA
33/66/100/133 function and remarkably high system performance
under all types of system operations.
The mainboard supports the built-in AC97 Codec, two 32-bit PCI
slots, one AMR (Audio Modem Riser) slot to support Audio and
Modem application, and a built-in 10BaseT/100BaseTX Network
Interface (optional).
This mainboard has the embedded 256-bit 3D AGP Graphics
Accelerator with 64MB frame buffer, supporting AGP 4X
266MHz mode up to 1GB/s bandwidth, which provides a direct
connection between the graphics sub-system and memory so that
the graphics do not have to compete for processor time with other
devices on the PCI bus. The mainboard supports built-in USB 2.0
providing higher bandwidth, implements Universal Serial Bus
Specification Revision 2.0 and is compliant with UHCI 1.1 and
EHCI 0.95.
There is a set of ATX I/O Ports including two PS/2 ports for
keyboard and mouse, one parallel port, one serial port and one
VGA port, one MIDI/Game port and maximum four USB 2.0
ports—two back-panel ports and onboard USB connector making
two extra USB ports by connecting the Extended USB Module to
the mainboard.
The board is Micro ATX size and has power connectors for an
ATX power supply.