User`s manual

Features Setup Page
This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard IR Port Disabled
OnBoard Parallel Port 378h
Parallel Port Mode ECP
Parallel Port IRQ 7
Parallel Port DMA 3
OnBoard Game Port 201h
OnBoard MIDI Port 300h
MIDI Port IRQ 10
OnBoard PCI IDE Both
Audio Device Enabled
Modem Device Enabled
Ethernet Device Enabled
IEEE1394 Device Enabled
USB Function Support Enabled
USB Function for DOS Disabled
ThumbDrive for DOS Disabled
ESC : Quit ↑↓←→ : Select
Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
PortA
Use these items to enable or disable the
onboard COM1/2 serial port, and to assign a
port address.
OnBoard Ir Port
Use this item to define the protocol for an
infrared port if you have installed an optional
IR port. The options are IrDA and ASKIR.
Onboard Parallel
Port
Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
26