Reference Manual
Table Of Contents
- Table of Contents
- Introduction
- Before Installation
- 1. Create your PayRange Operator Account
- a. Go to http://manage.payrange.com.
- b. Sign up for a customer account. If you already have a customer account, Sign in.
- c. Once logged in, click Create an Operator Account (may need to click Account first).
- d. Select Operator Sign up (at the bottom of the page), follow prompts to create your account.
- e. Setup ACH for payment with your bank routing and account number.
- f. Issue free vend code for installation tests.
- 2. Setup for Your Machine Installers
- a. Download and install the PayRange app.
- b. Load funds to the app with a credit/debit card, or issue free vend code.
- c. Prepare additional point of sale material such as table tents, location flyers, and location posters. These can be downloaded free at https://www.payrange.com/resources.
- d. Provide necessary tools and supplies
- i. BluKey Select device
- ii. Keypad Harness for the machine
- iii. Harness for card reader (if machines are equipped with card readers)
- iv. Room key and necessary building access cards
- v. Operator (Installer / Service) key for the machine
- vi. Smartphone, tablet or connected laptop with PayRange app
- vii. Installer login & password into Operator Account
- 1. Create your PayRange Operator Account
- Installation Steps
- 1. Disconnect power from the machine
- 2. Open machine cabinet
- 3. Connect Keypad Harness to Machine Keypad and Machine Control
- 4. Connect configuration plug to CONF connector
- 5. Plug Keypad Harness into BluKey Select KEYPAD connector
- 6. Plug MDB Machine harness into BluKey Select MACHINE connector
- 7. Is Card Reader Present?
- 8. Does machine support CPD2?
- 9. Machine with no CPD2 support:Connect Card Reader to BluKey Select CARD connector
- 10. Machine with CPD1/CPD2 support:Connect Card Reader to BluKey Select MDB harness
- 11. Connect BluKey Select to Machine MDB connector
- 12. Power up the machine (leave the machine door/panel open)
- 13. BluKey Select should power up and turn on solid blue LED
- 14. Configure BluKey Select
- 15. Power off the machine
- 16. Place wires and BluKey Select inside the machine
- 17. Close machine door/panel
- 18. Power up the machine
- 19. Verify machine operation
- 20. Place PayRange stickers on the machine
- BluKey Select Device Configuration
- 1. Register BluKey Select device (using website)
- a. Login with your operator account to the Manage website at https://manage.payrange.com
- b. Click DEVICES > Register in the left panel
- c. Enter device Serial number and Pin (from BluKey Select back label)
- d. Enter Display name (it will be shown in the app to customers)
- e. Enter other relevant information (laundry/machine type, location name, address, etc.)
- f. Optionally: upload picture of the machine number sticker to the “Picture” field (if picture is not uploaded, a standard machine number picture will be shown in the app)
- g. If there is a PayRange decal for the machine, attach the decal to the machine. If there is a scan to pay QR code, enter Scan to Pay number from the decal
- h. Click the Register button to complete device registration
- 2. Register BluKey Select device (using mobile app)
- a. Open PayRange app, Sign In with your operator account (if not logged in)
- b. Click on the hamburger menu (top left), select Operator Mode > Register Device
- c. Enter device Serial number and Pin (from BluKey Select back label), or click camera icon and scan the barcode
- d. Enter Display name (usually it is a number from machine sticker for customer)
- e. Enter other relevant information (machine type, location name, address, etc.)
- f. Note: Picture of the machine will be automatically generated.
- g. If there is a PayRange decal for the machine, attach the decal to the machine. If there is a scan to pay QR code, enter Scan to Pay number from the decal
- h. Click the Register button to complete device registration
- i. Proceed to section “Configure BluKey Select device for payment (using website)” below
- 3. Configure BluKey Select device for payment (using website)
- a. Login with your operator account to the Manage website at https://manage.payrange.com
- b. Enter device Serial number (from BluKey Select back label) into search box at the top, click Search > Search Device
- c. Click on the Device ID in search results to open Device view
- d. Click Edit Device
- i. Click Update
- 1. Register BluKey Select device (using website)
- BluKey Select Reference
- Regulatory Approval
- Troubleshooting / Light Codes
- Appendix B: BluKey Select Firmware Upgrade
- Contacting PayRange Support
- Document History
PayRange | BluKey Select™ Reference Manual
6/29/2021 Page 2 | 21
Table of Contents
Table of Contents .......................................................................................................................................... 2
Introduction .................................................................................................................................................. 3
Before Installation ......................................................................................................................................... 6
1. Create your PayRange Operator Account ......................................................................................... 6
2. Setup for Your Machine Installers ..................................................................................................... 6
Installation Steps ........................................................................................................................................... 7
1. Disconnect power from the machine ............................................................................................... 7
2. Open machine cabinet ...................................................................................................................... 7
3. Connect Keypad Harness to Machine Keypad and Machine Control ............................................... 7
4. Connect configuration plug to CONF connector ............................................................................... 8
5. Plug Keypad Harness into BluKey Select KEYPAD connector ............................................................ 8
6. Plug MDB Machine harness into BluKey Select MACHINE connector .............................................. 8
7. Is Card Reader Present? .................................................................................................................... 8
8. Does machine support CPD2? ........................................................................................................... 8
9. Machine with no CPD2 support: Connect Card Reader to BluKey Select CARD connector .............. 8
10. Machine with CPD1/CPD2 support: Connect Card Reader to BluKey Select MDB harness ......... 8
11. Connect BluKey Select to Machine MDB connector ..................................................................... 9
12. Power up the machine (leave the machine door/panel open) ..................................................... 9
13. BluKey Select should power up and turn on solid blue LED ......................................................... 9
14. Configure BluKey Select ................................................................................................................ 9
15. Power off the machine .................................................................................................................. 9
16. Place wires and BluKey Select inside the machine ................................................................
....... 9
17. Close machine door/panel ............................................................................................................ 9
18. Power up the machine .................................................................................................................. 9
19. Verify machine operation ............................................................................................................. 9
20. Place PayRange stickers on the machine ...................................................................................... 9
BluKey Select Device Configuration .............................................................................................................. 9
1. Register BluKey Select device (using website) .................................................................................. 9
2. Register BluKey Select device (using mobile app) .......................................................................... 10
3. Configure BluKey Select device for payment (using website) ........................................................ 10
BluKey Select Reference ............................................................................................................................. 11
Interfaces ................................................................................................................................................ 11
Connectors .............................................................................................................................................. 11
Absolute Maximum Ratings .................................................................................................................... 11