User's Manual

PayRange|BluKeyPro|UserManual
Page13|23
duringcycle fortheharnessinManage(seesection“Machine
ControllerProgramming”).
Machinedoesnot
acceptcoins
1. CheckifmachineacceptscoinsifBluKeyProharnessis
disconnectedfromthemachine’scoinharness(can
disconnectharnessfromBluKeyPro).Ifnot,replacecoin
acceptoranditsharness.
2. Checkmachine’swiring(aloosewireinconnectorpin
couldbecausingcoinsensor/switchdisconnects).
3. Foropticalcoinsensors:Cleancoinsensoropticsor
replacecoinsensororcoinacceptorassembly.