2009

Payflow Link Fraud Protection Services User’s Guide 33
Testing Payflow Link
Testing the Buyer Authentication Service
7
For testing, the first three characters of the submitted card security code value determine the
card security code result, as shown in
Table 7.7.
If you are using card security code checking and the Silent Post feature, then you can identify
which transactions have been voided by looking for the following value:
RESPMSG=CSCDECLINED.
NOTE: Be sure to look at the response message for your transaction. Even if your result code is
0, your response message might say that the transaction has failed.
Testing the Buyer Authentication Service
In Test mode:
z All test transactions go to PayPal’s simulator servers.
z No transactions are submitted to the Processor network, therefore no funds are transferred.
z Password/PIN: Test transaction results are determined solely by the test account number
submitted, so you can enter any password on the test Buyer Authentication page.
Test Account Numbers
To generate particular results, use the following test account numbers:
TABLE 7.7 card security code values and results
card security code value card security code Result
000 Null
001-300 Y
301-600 N
601 or higher X
TABLE 7.8 Test account numbers for obtaining particular results
Test
Case
Test Account
Number
Test Results Resulting Activity
1 5100000000000008
5200000000000007
4000000000000002
4000000000000101
Card enrolled
Successful authentication
Successful signature
verification
ACS page displayed, enter any password,
Payflow Link always displays successful
authentication.