Installation guide

1 2

C00070

PYIP PY2P

CORNER # 018 024 030 036 042 048 060 024 030 036 042 048 060

1 47.3 53.2 53.2 59.7 67.5 78.9 85.5 55.1 59.5 61.0 72.6 80.0 88.9

2 44.8 50.4 50.4 56.5 63.9 74.7 81.0 52.2 56.3 57.8 68.8 75.8 84.2

3 77.2 86.8 86.8 97.3 110.1 128.7 139.5 89.9 97.0 99.5 118.4 130.5 145.1

4 79.7 89.6 89.6 106.5 113.6 132.8 144.0 92.8 100.2 102.7 122.2 134.7 149.8

TOTAL WEIGHT 249 280 280 320 355 415 450 290 313 321 382 421 468

Fig. 5--PYIP and PY2P Unit Corner Weights

EVAP. COND.

COIL COIL

Fig. 6--Slab Mounting Details

C99014

HOOK

FEED

Fig. 7A--Threading Bolt for Rigging

C99067

The condenser fan pulls air through the condenser coil and discharges it through the top cover. Be sure that the fan discharge does not recirculate

to the condenser coil. Do not locate the unit in either a corner or under an overhead obstruction. The minimum clearance under a partial overhang

(such as a normal house overhang) is 48-in. above the unit top. The maximum horizontal extension of a partial overhang must not exceed 48-in..

Do not place the unit where water, ice, or snow from an overhang or roof will damage or flood the unit. Do not install the unit on carpeting, tile,

or other combustible materials. The unit may be installed on wood flooring or on Class A, B, or C roof covering materials.

.... 7 ....