Installation guide

402T0•
[15i_3]
[3.48]
li tttil
j lllLL
OPENING " 1
SUPPLY FURN
DUCT JCT
NING
L
3512 3473
[13 83] [13 67] [ 13.83]
4066
[16 01]
1
T COND
Y COIL _
EVAP
TOP VIEW
REARVIEW
REQUIRED CLEARANCE TO COMBUSTIBLE MATL.
INCHES [mm]
TOP OF UNIT ................................................................................... 14.00 [355.6]
DUCT SIDE OF UNIT ......................................................................... 2.00 [50.8]
SIDE OPPOSITE DUCTS ................................................................ 14.00 [355.6]
BOTTOM OF UNIT ............................................................................. 0.50 [12.7]
FLUE PANEL .................................................................................... 36.00 [914.4]
NED. REQUIRED CLEARANCES.
INCHES [mm]
BETWEEN UNITS, POWER ENTRY SIDE .................................... 42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE ......................... 42.00 [1066.8]
1090B
[4294]
\
1123 I
[44 22]
LEFT SIDEVIEW
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
INCHES [mini
EVAP. COIL ACCESS SIDE ............................................................ 36.00 [914.0]
POWER ENTRY SIDE .................................................................... 36.00 {914.0]
(EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP ....................................................................................... 48.00 [1219.2]
SIDE OPPOSITE DUCTS .............................................................. 36.00 [914.0[
DUCT PANEL ................................................................................. 12.00 [304.8] *
*MINIMUM DISTANCES: IF UNIT IS PLACED LESS THAN 12.00 [304.8] FROM
WALL SYSTEM, THEN SYSTEM PERFORMANCE MAYBE COMPROMISE.
Note: Wire Grilles are a field installed option.
1193.9
[47 00]
t
T ] 141111 llllll
/ !Jlttt ittttl
_OMPRES_OR, BLOWER, GAS SECTION
& ELECTRICAL ACCESS PANEL
122L3
[48.2_]
FRONTVIEW
[I 6_]
_3290
[1295]
_;2 4
[285]
LEGEND
CG- Centerof Gravity
COND- Condensor
EVAP- Evaporator
NEC-NationalElectricalCode
REQ'D-Required
--115.4
[454]
NOTE:Dimensionsare in in. [ram]
FLUE HOOD
[5.61]
RIGHTSIDEVIEW
C00056
UNIT
PY1 P048090/115/130
PY1 P060090/115/130
PY2P042060/090
PY2P048090/115/139
PY2P060090/115/139
ELECTRICAL CHARACTERISTICS
208-230/1/60, 208/230-3-60, 460-3-60
208/230-1-60, 2081230-3-60, 460-3-60
208/230-1-60, 208/230-3-60, 460-3-60
208/230-1-60, 208/230-3-60, 460-3-60
208/230-1-60, 208/230-3-60, 460-3-60
UNIT WEIGHT UNIT HEIGHT IN. (MM)
"A"
Ib k 9
415 188.6 38.98 (990.2)
450 204.5 38.98 (990.2)
382 173.3 38.98 (990.2)
421 191.0 38.98 (990.2)
468 212.3 42.98 (1091.1)
CENTER OF GRAVITY
IN. (MM}
X Y Z
22 (558.5) 16 (406.4) 17 (432.0)
22 (558.5) 16 (406.4) 17 (432.0)
23.0 (584.2) 16.3 (412.8) 16.6 (421.6)
21.5 (546.1) 16.6 (422.1) 18.0 (457.2)
23.5 (596.9) 16.3 (412.8) 17.6 (447.0)
Fig. 3--PYIP048-060 and PY2P042-060 Unit Dimensions