Installation Manual

Microfence Installation Manual 9
AAA Battery Insertion
1. Separate the beacon from the wall mount as shown in
prior section.
2. Insert fresh AAA batteries oriented as shown in the
battery holder.
3. Snap the beacon back into the wall mount. The wall
mount has a retainer to hold the batteries in place.
Do not mix old and new batteries!
Power Adapter Usage
The power adapter is attached to the beacon with the provided
Micro USB-B cable.
1. Plug the Micro USB-B end of the cable into the beacon
USB port.
2. Plug the USB-A end of the cable into the power adapter.
3. Plug the power adapter into the wall.
LED operation
Upon power-up the beacon LED indicator will blink briefly.
Thereafter, the LED indicator will blink briefly every 5 minutes.
Configuring Beacon
This beacon has been assigned to your client code by Paycom.
Before employees can use the beacon, it must be assigned to a
web terminal.
!