User Manual

Adding the card pack
1. Take the master card from storage.
2. Swipe the master card through the reader.
3. The reader beeps and the LED's light up as the master card is acknowledged.
4. Return the master card to storage. The shadow card pack can now used for enroling user cards.
Programming the system
BEEP!
BEEP!
Master Card
1. To enrol a user card, write the user’s name on
a paper card, swipe it through the reader, then
swipe the user card through the reader
2. To set the door open time, swipe this card, the
reader will beep, wait for the required period,
swipe the card again, the bleeping will stop.
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Master Card
1. At installation, present this
card to the reader to validate
the tokens in this pack.
2. To re-validate a user token,
present this enrolment card
to the reader followed by the
user token.
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
1
2
3 4
Adding user cards
Swipe this card to bar:
Write name:
John Smith
1 2 3 4
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
1. Select a shadow card and write the name of the user on it.
2. Swipe the shadow card through the reader.
3. Swipe a supplied user card. ( or any card encoded on Track 2 ) - That user card is now enrolled.
4. Return the shadow card to storage and keep in a safe place.
Barring user cards
1 2 3 4
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
2254 3333 4596 7788
1. Ascertain which card you wish to bar.
2. Take the matching shadow card from storage.
3. Swipe the shadow card through the reader and return to storage.
4. The user card will no longer be granted entry and the Red LED will display.