Specifications

11V DC 14V DC
1 A
11V DC 14V DC
80 mA
119 kHz 140 kHz
2.405 GHz 2.480 GHz
600 µs
Belden 9540
100 m
0.75 mm sq
2.5 mm sq
80 mm 40 mm 10 mm
5000 mm
2000 mm
P200 2500 mm
P75 1500 mm
P50 1100 mm
P38 850 mm
- 35 °C + 66 °C
IP66
220 mm 220 mm 135 mm
Specications
Voltage - Reader module
Clock and data bit period
Carrier frequency
Operating temperature
Electrical
Environment
Dimensions
Min
Max
Width
Height
Depth
Current - Reader module
P200E metal mount
Cable type for extensions
Cable length between ACU and reader
Read range with hands free token
Waterproof
Additional power supply required
Outdoor use
Button conrmation input
Yes
Yes
Long range reader
Min
Min
Max
Max
Paxton Access Ltd hereby declares that this product is in conformity with all the essential requirements of Directive 1999/5/EC.
This equipment is intended for use in all EU and EFTA countries and all other countries worldwide.
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
Token
Keyfob
Watchprox
Read range with passive tokens
Long range reader
Using an entry conrm button
Where more than one door interface can pick up the hands free token, a 'push to make' button can be used
to select the required door. Where tted, the LED on a conrm button will ash for 5 seconds after the
hands free token has been recognised and must be pressed to unlock the door.
Once an entry conrm button has been tted to the interface PCB, perform the following sequence:
1. Power down the interface board.
2. Power up the interface board.
3. Press and hold the entry conrm button for a minumum of 3 seconds within 60 seconds of power up.
To disable the use of the button, repeat the above sequence.
Voltage - Interface module
Current - Interface module
12V Power cable core diameter - up to 5 m run
12V Power cable core diameter - up to 100 m run