Specifications

1 10
1
100
2.405 GHz
30 m
100V AC 240V AC
10V DC 14V DC
150 mA
0.4 W 3.8 W
-20 °C 55 °C
200 mm 200 mm 80 mm
Specications
Carrier frequency
Environment
Dimensions
Min
Max
Width
Height
Length
System Specication
DC supply voltage
Electrical
DC supply current
Waterproof
Min
Max
Min
Max
ACU's per Net2Air bridge - Recommended
No
Net2Air USB bridge per system
Operating temperature
Net2Air wireless range
Net2Air Ethernet bridge per system
Power over Ethernet (PoE) power rating
Mains supply voltage
IEEE 802.3 af
The declaration of conformity is available on request.
Contact details are provided at: http://paxton.info/596
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
Data Reset
To clear all settings back to their factory default, including clearing the current IP address and setting the
bridge to acquire new addresses using DHCP, power on the unit with the reset button held down for 3 seconds.
The unit will beep to acknowledge once the reset is complete.
Sounder
The device will 'beep' when detected by the Net2 Server Conguration Utility or when new IP settings are applied.
The sounder will also respond to a direct 'Ping' over the network. This is a feature to assist with nding devices
hidden from view.
Power
Net2Air wireless activity (Tx/Rx) - Blue
Server Connected - The TCP/IP interface is
communicating with the PC Net2 server
TCP/IP LAN
connection
LED indications
Reset button
Power LED