User Manual
Please read the following notes before installing
In this kit you will nd the following items. If you nd that any of the parts
are missing or damaged, please notify your supplier.
PAGE 2
Electrical shock from voltages used in this system can cause injury or death. Prior
to making any electrical connections, or performing maintenance and repair, ensure
power is removed.
Mains electrical connections should be made only by qualied personel in accordance
with local regulation.
1. Safety goggles should be worn while using power tools.
2. Before drilling the mounting holes, check the area for concealed wires and pipes.
3. The power supply provided is suitable for internal mounting only.
Step 1: Carefully mark out the mounting holes for the reader and the hole of the cable feed.
Step 2: Drill the marked holes for the mounting points and the cable feed. When drilling the holes,
ensure that you are aware of any hidden cables or pipes. Once the holes have been drilled, t the
supplied wall plugs and feed the cable through the cable feed hole before securing the reader to the
wall using the screws supplied.
Step 3: Fit the reader cover to the reader, and secure using the screw provided.
Fitting the reader
Other Items Required
Fail open or fail closed lock Push to make exit button
5.5 mm masonary drill bit 10 mm masonary drill bit
Electric drill Screwdrivers
Safety goggles Hammer
1 2 3
4 5 6
7 8 9
*
0 #
X 1
X 1
X 1
X 2
X 2