User's Manual

4
8
9
7
- 1-3/4” (45mm)
- 2” (50mm)
Step 8: Ensuring the latch engages
Make sure the tail of the latch is engaging with
the motor retractor correctly as illustrated.
Step 7: Rotating the motor adjustment plate
To ensure that the motor adjustment plate is at
the correct distance, rotate until it sits ush with
the door and the motor has engaged properly.
Please refer to the diagram for the correct
position of the plate for each door thickness.
Step 9: Fitting the front housing
Line up front housing and ensure the body is
ush to the door.
*PaxLock US is set up for RH doors by default –
please see page 8 for LH operation.