User's Manual

Exit
Exit button
(push to make)
Electric release
To 12V dc Power
supply
12V DC release current rating must be less than 1A.
Wiring
Screw connector wiring
Wire outputs
12v DC
0v
Lock 12V
Lock 0V
Exit 0V
Reset - Use 1 method, not both
1. Power down the unit
2. Press and hold the exit button
3. Power up the unit - wait for beep/red LED to go out
4. Release and press the exit button a further 2 times
(within 3 seconds)
5. The reader will beep 6 times
OR
1. Present Enrolment card
2. Present Door open time card twice
3. Present Enrolment card
4. Present Door open time card twice
5. WAIT FOR 5 SECONDS!